Glide Repairable
Glide Repairable
Harley Builds 3-wheel Motorcycles - Harley Magazine Review of the 2009 Tri-glide
The rumor mill never seems to slow down when it comes to Harley-Davidson and its future bikes. I guess that kind of passion and curiosity is what drives the MoCo. The rumor of a factory Harley-Davidson trike making a comeback after more than three decades is true. The new Tri Glide Ultra Classic will be available at your local Harley dealer in limited numbers as a 2009 model.
Let’s start with what the machine is and isn’t. It is a genuine Harley-Davidson covered by a full factory 2 year warrantee. It is manufactured by Harley in association with Lehman Trikes of South Dakota. It lists for $29,999 (in the US) and is available in the 48 contiguous US states and Canada. It is well engineered, looks good and is a blast to ride. It isn’t a warmed over Lehman trike. I don’t know why this project was internally nicknamed “Boomer” but it was, and now you know.
What’s involved in riding a trike verses a bike? Well, let’s just say that they are exactly the same only different. Quite different. Same throttle, clutch, shifter and brakes. But the handling is more like a car because trikes don’t lean, they steer around turns. So get used to pulling on one side of the handlebars and pushing on the other through the turns. And, thanks to all the extra weight out back, you’ll have to slip the clutch a bit more and give it a bit more throttle coming off a stop than with a bike. Plus you can keep your feet on the floorboards all the time, even at a full stop. And always remember that your machine is a lot wider than a bike, even a bagger, when going through narrow spaces. And just because you missed the pothole in the road with your front tire doesn’t mean you’ll miss it with your rear ones. And. . . well you get the idea. Trikes and bikes are simply different.
Out on the road the Tri Glide is impressive. I have ridden several old and new trikes over the years and feel this is the best of the breed. Superior handling, a healthy power train and top notch fit and finish – and this was on a pre-production model! The low and high speed handling is more neutral than I expect from a trike. I suspect the purpose-build frame and specific fork geometry and rear suspension has a lot to do with that. Once you get used to slipping the clutch slightly from a dead stop and push/pull steering on the handlebars, riding the Tri Glide is a blast. I predict these machines will sell out quickly with a waiting line once word is out on how much fun they are. Anyone who has ridden a two-wheel motorcycle will quickly take to the Tri Glide and will be confidently cruising the highways and slicing through zig zag turns on back roads in no time.
In our discussions with Harley’s marketing and engineering staff we heard how the main goal for the Tri Glide was “to extend riding access” which we took to mean extending the riding season (trikes handle better in snow, ice and rain than bikes do) as well as making people more comfortable riding a stable three-wheeler than a less stable two-wheeler. The Harley staffers told us their target customers tend to be more experienced riders. One of the senior people confided in us “A lot of people who try a Tri Glide for the first time are pleased and surprised with the ride.” After we put some miles on one we have to agree,
Unlike any other current model Harley-Davidson that I am aware of, the host portion of the new Tri Glides are built on a new assembly line in the York factory. It is then shipped to the Lehman factory in South Dakota to be finished. From there, the complete machines are shipped to Milwaukee where they are forwarded on to the dealer network. When we asked about the relationship between Lehman Trikes and Harley-Davidson we were told that Lehman is actively involved in the process, but the Harley Tri Glides are quite different than Lehman’s own Ultra-based trikes. While the Lehman version uses a modified stock Harley FL frame and one-piece rear body section, the Tri Glides use unique, purpose-built frames and separate rear body sections and fenders. Harley assured us the current association with Lehman is not based on a buy-out or a joint venture. Harley views Lehman as a supplier.
OK, so what else is unique or unusual about the Tri Glide? We have already touched on the specific-to-this-model frame with increased fork angle and less trail for better steering effort. It has an electronic hand control to activate the optional electric reverse motor. The front forks are longer than those on the two-wheel Ultras and have an external steering stabilizer for a more consistent ride.
The front wheel is a 16 inch hoop, the rears are 15 inchers. The wheels and brake rotors all match. Machines with this much weight need good brakes, and the front dual Brembos are up to the task. The 103 cubic inch engine mated with a heavy duty police-style clutch offers sufficient power to get down the road quite smartly. The Tri Glide has a unique transmission case and rear mounts are also different from the stock Harley Ultra two-wheel version. There is a standard oil cooler to help keep engine temperatures down, and the new for 2009 mufflers compliment the modified header pipes.
The Tour Pak is rated for up to 30 pounds of cargo, and the trunk, featuring hidden hinges and a lockable latch, can handle an additional 50 pounds in 4.3 cubic feet. We like the rear fenders are separate from the trunk and attached to it. Typically the trunk and rear fenders on most trikes are built as one unit making repairs or replacement quite expensive.
Apparently Harley management had been considering the possibility of adding a trike to the line-up for some time but there were many issues to deal with. These included safety concerns, marketing options, and manufacturing challenges. When we asked about the stability of a Tri Glide in various real world riding conditions, one of the Harley engineers responded by saying they designed it with several goals in mind. “We wanted it to slip” he said, “before it would tip.”
2 critical measures the trike had to pass were the lane change maneuver at highway speeds, and the steady state turn (in tight circles at increasing speeds). The trike accomplished both with room to spare. Harley management ok’d the project when they realized the Ultra-based Tri Glide can go faster and corner harder than a stock Harley Ultra motorcycle “so we felt a comfort zone there.”
All the 2009 Tri Glides will be based on Ultra Classics. But Harley isn’t saying whether this might change in the future to expand across other models using V-Rods, Dynas or Sportsters as the base. However, given the fact that Harley considers the Tri Glide a new separate model platform, I’d bet there are more variations in the works. Personally, I’d like to see a water-cooled V-Rod powered trike.
Harley is planning on building only 2500 Tri Glides for 2009 in three color options – Vivid Black, Dark Blue Pearl or Red Hot Sunglo, and plans are for them to be available in Harley dealerships in August 2008. MSRP is $29,999, which is significantly less than a similar Lehman Harley Ultra, and the Tri Glide comes with a 2-year factory warrantee. Want one? Better get your name and deposit to your dealer ASAP. They are going to go fast.
Interested in learning more about Harley motorcycles, from Sportsters to Softails and touring FL motorcycles? Check out motorcycle bulletin board and Harley forum www.aimag.com, run by American Iron Magazine, where this article was first published.
About the Author
Teflon mouse feet/skates wearing off my Razer Destructor or viceversa?
Hello I have a Razer Mamba mouse and a Razer Destructor mousepad. Had them both for 3 weeks or so now. Been playing a bit of Quake Live during this time. My issue is that now the Mamba no longer moves as smoothly on the middle side of the pad where it was most used on. When I bring it to the sides of the pad it behaves/glides like brand new.
I tried new teflon skates for the mouse because that's what I initially thought was the problem but they suck.
What do you guys know about this? Should I try to find some skates made out of a different material other than teflon? Is the Destructor washabale/repairable or is it gonna stay this way regardless of what skates I buy for the mouse?
I forgot to mention the mouse feet are kind of 'eaten', not much but for 3 weeks of use only they kind of are too worn off. And also the problem I described is pretty bothersome is not just that I want perfect gliding of the mouse
It sounds like your mouse pad is dirty or worn out. I recommend one with a hard, textured surface. (if this describes yours, look at it closely to see if the texture has worn off of parts of it)
Best of luck!
Glide Repairable
SOLD -- 2008 Harley-Davidson Street Glide - Stock No. 4073 repairable, damaged, salvage -- SOLD
|
|
Glide $12.97 Glide |
Maintenance and Repairs FAQ
07 Yaris near rims?
heres my question i hold a yaris and the factory put 15 inch steel wheels on it and i am wondering if i can put the regular size 14 inch alloy rims on it short causing any troubles next to brakes or anything? I understand i...
1 carboned spark plug?
I have had a problem next to my 90 pontiac 6000 3.1mpfi engine, 6 months ago I floored it and have since had this *steadily getting worse* problem. As soon as the system go to closed loop mode my engine starts shaking, smoke out the exhaust...
1 ton bubble unified replacement?
just wondering what it will cost to have my orb joints replaced on my F350 4x4. I will need both sides, upper and lower done.
1) When your car's steering joystick and brake pedal suddenly shakes alerting you to promise near your rotors,?
because the front brake pads are also wearing down? My Highlander only just started to do this. I'm the second owner. And, 2) Does this mean the previous owner rided out the rotors formerly finally changing the pad? I want to know before I embezzle it...
1,000 dollar nuptials company fell surrounded by side of cat form??
My wedding band that my fiance bought me fell into the side of my coupé seat (the medal) part...I tried to pry it out next to a safety pin but then it fell adjectives the way in and I can no longer see it. Does...
1.2 95 clio wont stay running, near loss of power?
had an bright alternator on the other day consequently changed the battery, afterwards still had to find it jump started, and driving home from work within was no power, my lights wouldn't work when i try to indicate the power go (what there is of it)...
1.25 16v ZETEC vs 1.4 16v?
Which one would drink more petrol out the above engines?
1.3gsi 2k articulation.when braking I win a grinding clap. judder feebly beneath foot. New brakes and discs nov07?
Has just passed an mot in which steering rod ends (front) replaced. still own the problem. When it happens it feels approaching the brakes aren't going to stop me in time with my foot flat to the flooor and a horrible juddering hullabaloo and...
1.6 zafira rattle when revving the engine, is this mundane on an engine beside 45,000 miles on clock ?
zafira engine rattles at certain revs, if you sit near engine on tickover it sounds fine, but increase revs to about 2500 and there is a jingle, not a tinny rattle , sounds like tappets rattle through the oil, just considered necessary to know if this...
1.7td engine...............................?
oil is black, using seriously of water,their is no excessive smoke from exhuast lofty back pressure on dampen tank what's the problem? Unless you hold an idea or some know-how please don't waste our time by answering gratitude
1.9 L Ford Escort Blower Moter Relay location?
Where the heck is it!! I cannot find the relay! I'm working on a used 95 Escort and it seems as though someone have bypassed the relay. I need to find it and correct the problem.
10 yr hoary 4 cyl. ford ticks when its cold.?
The tick is loud but does not occur beside it over 60 degrees or so outside. The nouns goes away after the vehicle warms up. THis nouns like a carriage or lifter or what? Car have 230000mi.
100watt bulbs on low girder?
Hello, I was in recent times wondering is there any mar if I replace my low beam wispy bulbs with 100 watt Xenon bulbs. my artistic bulbs are 55 watt. It is Kia optima 2004.
1190 Sunbird have to start? fuel ok! electrical ok!?
I've checked the injectors and thotle body as well. so what's wrong! not competent to start for a long time.. Computer?micro chip?
12 and 24 Volts from 2 very 12V battery?
I'm upgrading my RV with 2x200Ah house battery. Most of the systems are 12V so they will, no matter what, be wired contained by parallel. However, some of my utilities (the laptop, power tools etc) require 24V to recharge which I can step-down as needed. ...
12 volt thoughtful cycle charging?
can you charge more than one battery at a time beside a 10amp charger, ie: putting the batteries within a loop?
12v reading bet. + pole of freestyle and metal groundwork of voltage regulator, is it usual?
detached voltage regulator from car's body and found 12v reading between + pole of battery and metal base of voltage regulator, is this ordinary? didn't run the engine as my voltage regulator might burn again. my car is toyota revo glx 2003 model.
15 hp techumseh carb give somebody the third degree?
15 hp techumseh engine on an mtd lawn tractor. on the bottom of the carberator in that is what appears to be a soilanoid. it's on the bottom of the bowl. it has 2 wires going to it. one is a ground, does anyone know what the...
15% tinted window.. Can you see out?
if i get adjectives 15% tinted windows adjectives around, am i gonna be able to see out of my backside view, windshield, side window?
15,000 Mile Service?
It will cost me $200 dollars to have this service on my 06 civic, do i really call for it? there's a lot of b/s almost checking stuff. should i just tweaking oil, grease filter, rotate tires, and change my nouns filter like i other do? does...
150,000 mile anti-freeze?
Is this anti-freeze over rated? This fluid needs to be changed every 30,000 miles because over time it stops preventing corrosion and it loses it's lubricant merits for the water pump. Is it safe to give up anti-freeze in the radiator for 150,000 miles?...
150,000 on my Toyota - What would you recommend for a tune up?
I purchased the car near 123,xxx miles and serviced it ever since. Oil has also be changed regularly. When I purchased the vehicle, the transmission fluid be still cherry red and the consistency/viscosity is still good in a minute. The car feel a little...
16' Trailer lights won't work?
We have a 16' trailer. We are using a truck to verbs it. After we connected the trailer to the truck and tested the lights for the trailer, the trailer lights would only work correctly when the truck headlights be off. When the truck lights...
17 inch rims for 97 prelude?
DOES ANYONE HAVE ANY 17" RIMS FOR A 97 PRELUDE FOR SALE?
18 volts instead of 12 volts?
I have a neon light, from the neutral it connects directly into a transformer that puts out 1500V/ 15mA. Originally it was supposed to plug into a cigarette lighter in a saloon but i snipped the wire because I don't want the wiring to be marked....
18000 pounds what mods can I put on my saloon?
it is a VW GOLF R32 (2007) turbos, superchargers, induction, exaust kits or anything that will brand name it faster or sound nice. also aftermarket ocular mods like Window tint, spoilers, alloy wheel, racing spaces neons etc... websites or advice please... thank you
1937 Packard Super Eight Restoration how to?
I need to swot up how to restore a 1937 packard. What are the crucial steps I should take to accomplish this? How should I nouns it and are there great restoration expert surrounded by the Pennsylvania / Tri-state area whom I can contact? Thanks!
1953 pontiac cHeifton?
I have this car and it will not start unless I pocket a wire straight from the battery to the ignition coil. It will crank over near out i but will not get any noticable fire or start. When i remove this ire it instantly dies....
1958 Chevrolet Bel-Air Engine Swaps?
What engines will fit into a 1958 Chevrolet Bel-Air engine bay near little or no problems? Where does one shop for swap kits to convert from small block to big block or big block to small block? What roughly trans crossmembers or transmissions to use with distinctive...
1962 Corvair Rat Rod. Need tips on how to clear it a cruiser.?
i have a 1962 Corvair next to an automatic 2 speed power glide. its primered brown right very soon. i want to primer a different color. looking for a like flat mint green color near the rims painted red on white walls. or...
More Maintenance and Repairs questions please visit : YesImAuto.com
About the Author
YesImAuto.com
Glide Repairable
